LINAC2022 - List of Authors (Miski-Oglu, M.)

Paper	Title	Page
MOPOPA16	UNILAC Heavy Ion Beam Operation at FAIR Intensities	102
	W.A. Barth, M. Miski-Oglu, U. Scheeler, H. Vormann, M. Vossberg, S. Yaramyshev GSI, Darmstadt, Germany M. Miski-Oglu HIM, Mainz, Germany
	The GSI-UNILAC as well as the heavy ion synchrotron SIS18 will serve as a high current heavy ion injector for the FAIR synchrotron SIS100. In the context of an advanced machine investigation program acceleration and transport of space charge dominated argon beam inside entire UNILAC have been explored. The conducted high current argon beam measurements throughout the UNILAC-poststripper and transferline to SIS18 show a transversal emittance growth of only 35% for the design current of 7 emA (40Ar¹⁰⁺). By horizontal collimation of the UNILAC beam emittance, the space charge limit could be reached at slightly lower pulse currents, but accordingly longer injection times. Further improvements in brilliance can be expected from the planned upgrade measures, in particular on the high-current injector linac.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2022-MOPOPA16
About •	Received ※ 19 August 2022 — Revised ※ 22 August 2022 — Accepted ※ 26 August 2022 — Issue date ※ 01 September 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPOPA18	High Intensity Heavy Ion Beam Optimization at GSI UNILAC	110
	H. Vormann, W.A. Barth, M. Miski-Oglu, U. Scheeler, M. Vossberg, S. Yaramyshev GSI, Darmstadt, Germany
	To improve the UNILAC’s performance for the upcoming use as heavy ion injector for the FAIR accelerator chain, dedicated beam investigations have been carried out. In particular measurements with Bismuth and Uranium beams require the highest accelerating voltages and powers of the rf cavities, the rf transmitters and the magnet power converters. After four years without Uranium operation (resp. with Uranium, but restricted cavity voltages), the UNILAC has now been operated again with a performance close to that of former years. Several upgrade measures will improve the UNILAC capability. In combination with the prototype pulsed gas stripper with hydrogen gas, beam intensities not far below the FAIR requirements can already now be expected.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2022-MOPOPA18
About •	Received ※ 24 August 2022 — Revised ※ 26 August 2022 — Accepted ※ 28 August 2022 — Issue date ※ 01 September 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPOGE21	A Superconducting 217 MHz Single Spoke Cavity for the Helmholtz Linear Accelerator at GSI	200
	F.D. Dziuba, K. Aulenbacher, W.A. Barth, V. Gettmann, T. Kürzeder, J. List, M. Miski-Oglu HIM, Mainz, Germany K. Aulenbacher, W.A. Barth, F.D. Dziuba KPH, Mainz, Germany K. Aulenbacher, W.A. Barth, M. Basten, C. Burandt, F.D. Dziuba, V. Gettmann, T. Kürzeder, S. Lauber, J. List, M. Miski-Oglu, S. Yaramyshev GSI, Darmstadt, Germany T. Conrad, H. Podlech, M. Schwarz IAP, Frankfurt am Main, Germany
	Funding: Work supported by GSI, HIM, BMBF Contr. No. 05P18UMRB2 A new superconducting (SC) continuous wave (CW) linac, providing high efficient heavy ion acceleration above the coulomb barrier, is going to be built at GSI to fulfill the upcoming demands in the research field of super heavy element (SHE) synthesis. The so called HELIAC (HElmholtz LInear ACcelerator) delivers ion beams in the energy range of 3.5 MeV/u and 7.3 MeV/u with a mass to charge ratio (A/z) of up to 6. Superconducting multi-gap crossbar-H-mode (CH) cavities with a resonance frequency of 217 MHz are used for beam acceleration. In addition, SC single spoke buncher cavities should ensure longitudinal beam matching to the corresponding CH sections. Therefore, the first 217 MHz single spoke cavity with beta 0.07 has been developed at HIM/GSI and built at an industrial partner. In this paper the design of the cavity and first RF measurements during manufacturing are presented.
	Poster MOPOGE21 [2.619 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2022-MOPOGE21
About •	Received ※ 18 August 2022 — Revised ※ 24 August 2022 — Accepted ※ 27 August 2022 — Issue date ※ 31 August 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPOPA18	Test and Commissioning of the HELIAC Power Coupler	454
	J. List, K. Aulenbacher, W.A. Barth, M. Basten, C. Burandt, F.D. Dziuba, V. Gettmann, T. Kürzeder, S. Lauber, M. Miski-Oglu, S. Yaramyshev HIM, Mainz, Germany K. Aulenbacher, W.A. Barth, F.D. Dziuba, S. Lauber, J. List KPH, Mainz, Germany K. Aulenbacher, W.A. Barth, M. Basten, C. Burandt, F.D. Dziuba, V. Gettmann, T. Kürzeder, S. Lauber, J. List, M. Miski-Oglu, S. Yaramyshev GSI, Darmstadt, Germany T. Conrad, H. Podlech, M. Schwarz IAP, Frankfurt am Main, Germany
	The superconducting continuous wave (cw) heavy ion HElmholtz LInear ACcelerator (HELIAC) is intended to be built at GSI in Darmstadt. With its high average beam current and repetition rate, the HELIAC is designed to fulfill the requirements of the super heavy element (SHE) research user program and the material sciences community at GSI. The accelerating cavities are of the superconducting Crossbar H-mode (CH) type, developed by GUF. Within the Advanced Demonstrator project, the first cryomodule, consisting of four cavities is scheduled for commissioning with beam in 2023. The former RF power couplers introduced a high heat input into the cryostat. Therefore, the coupler is redesigned at HIM in order to not only reduce the heat input but to provide an overall improved power coupler for the HELIAC. It is designed for maximal power of 5 kW cw at the frequency of 216.816 MHz. A prototype has been tested and commissioned recently. This includes several RF-tests at room temperature and in cryogenic environments. The results of these tests will be presented in this paper.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2022-TUPOPA18
About •	Received ※ 20 August 2022 — Revised ※ 21 August 2022 — Accepted ※ 30 August 2022 — Issue date ※ 01 September 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPOPA19	Preparation for Commissioning with Beam of "Advanced Demonstrator" Module with Heavy Ion Beam	114
	M. Miski-Oglu, W.A. Barth, M. Basten, C. Burandt, F.D. Dziuba, T. Kürzeder, S. Lauber, J. List, S. Yaramyshev HIM, Mainz, Germany W.A. Barth, M. Basten, C. Burandt, F.D. Dziuba, V. Gettmann, T. Kürzeder, S. Lauber, J. List, S. Yaramyshev GSI, Darmstadt, Germany W.A. Barth, F.D. Dziuba, S. Lauber, J. List KPH, Mainz, Germany H. Podlech, M. Schwarz IAP, Frankfurt am Main, Germany
	The integration of the accelerator components in to the cryogenic module prototype (Advanced Demonstrator) is a major milestone of the R&D for the superconducting heavy ion continuous wave linear accelerator HELIAC at GSI. The HELIAC is joint project of Helmholtz Institute Mainz (HIM) and GSI developed in collaboration with IAP Goethe University Frankfurt. This module is equipped with three superconducting (sc) Cross bar H-mode (CH) acceleration cavities CH0-CH2 and a sc rebuncher cavity, as well as two sc solenoids. The commissioning of the cryogenic module with Argon beam at GSI is scheduled for August 2023. In preparation for the beam test activities, the beamline, which connects the High Charge State Injector (HLI) with the testing area, has been installed. The beamline comprises a pair of phase probes for Time Of Flight (TOF) measurement of the incoming beam energy, quadrupole lenses and a 4-gap RF-buncher cavity. The beam diagnostics bench behind the cryo module is equipped with phase probe pairs, a slit-grid device, a bunch shape monitor (Feshenko monitor) for measurements of the longitudinal beam profile. The bench allows complete 6d characterization of the ion beam.
	Poster MOPOPA19 [3.074 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2022-MOPOPA19
About •	Received ※ 24 August 2022 — Revised ※ 29 August 2022 — Accepted ※ 01 September 2022 — Issue date ※ 04 September 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

UNILAC Heavy Ion Beam Operation at FAIR Intensities

102

W.A. Barth, M. Miski-Oglu, U. Scheeler, H. Vormann, M. Vossberg, S. Yaramyshev
GSI, Darmstadt, Germany
M. Miski-Oglu
HIM, Mainz, Germany

The GSI-UNILAC as well as the heavy ion synchrotron SIS18 will serve as a high current heavy ion injector for the FAIR synchrotron SIS100. In the context of an advanced machine investigation program acceleration and transport of space charge dominated argon beam inside entire UNILAC have been explored. The conducted high current argon beam measurements throughout the UNILAC-poststripper and transferline to SIS18 show a transversal emittance growth of only 35% for the design current of 7 emA (40Ar¹⁰⁺). By horizontal collimation of the UNILAC beam emittance, the space charge limit could be reached at slightly lower pulse currents, but accordingly longer injection times. Further improvements in brilliance can be expected from the planned upgrade measures, in particular on the high-current injector linac.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2022-MOPOPA16

About •

Received ※ 19 August 2022 — Revised ※ 22 August 2022 — Accepted ※ 26 August 2022 — Issue date ※ 01 September 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPOPA18

High Intensity Heavy Ion Beam Optimization at GSI UNILAC

110

H. Vormann, W.A. Barth, M. Miski-Oglu, U. Scheeler, M. Vossberg, S. Yaramyshev
GSI, Darmstadt, Germany

To improve the UNILAC’s performance for the upcoming use as heavy ion injector for the FAIR accelerator chain, dedicated beam investigations have been carried out. In particular measurements with Bismuth and Uranium beams require the highest accelerating voltages and powers of the rf cavities, the rf transmitters and the magnet power converters. After four years without Uranium operation (resp. with Uranium, but restricted cavity voltages), the UNILAC has now been operated again with a performance close to that of former years. Several upgrade measures will improve the UNILAC capability. In combination with the prototype pulsed gas stripper with hydrogen gas, beam intensities not far below the FAIR requirements can already now be expected.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2022-MOPOPA18

About •

Received ※ 24 August 2022 — Revised ※ 26 August 2022 — Accepted ※ 28 August 2022 — Issue date ※ 01 September 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPOGE21

A Superconducting 217 MHz Single Spoke Cavity for the Helmholtz Linear Accelerator at GSI

200

F.D. Dziuba, K. Aulenbacher, W.A. Barth, V. Gettmann, T. Kürzeder, J. List, M. Miski-Oglu
HIM, Mainz, Germany
K. Aulenbacher, W.A. Barth, F.D. Dziuba
KPH, Mainz, Germany
K. Aulenbacher, W.A. Barth, M. Basten, C. Burandt, F.D. Dziuba, V. Gettmann, T. Kürzeder, S. Lauber, J. List, M. Miski-Oglu, S. Yaramyshev
GSI, Darmstadt, Germany
T. Conrad, H. Podlech, M. Schwarz
IAP, Frankfurt am Main, Germany

Funding: Work supported by GSI, HIM, BMBF Contr. No. 05P18UMRB2
A new superconducting (SC) continuous wave (CW) linac, providing high efficient heavy ion acceleration above the coulomb barrier, is going to be built at GSI to fulfill the upcoming demands in the research field of super heavy element (SHE) synthesis. The so called HELIAC (HElmholtz LInear ACcelerator) delivers ion beams in the energy range of 3.5 MeV/u and 7.3 MeV/u with a mass to charge ratio (A/z) of up to 6. Superconducting multi-gap crossbar-H-mode (CH) cavities with a resonance frequency of 217 MHz are used for beam acceleration. In addition, SC single spoke buncher cavities should ensure longitudinal beam matching to the corresponding CH sections. Therefore, the first 217 MHz single spoke cavity with beta 0.07 has been developed at HIM/GSI and built at an industrial partner. In this paper the design of the cavity and first RF measurements during manufacturing are presented.

Poster MOPOGE21 [2.619 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2022-MOPOGE21

About •

Received ※ 18 August 2022 — Revised ※ 24 August 2022 — Accepted ※ 27 August 2022 — Issue date ※ 31 August 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPOPA18

Test and Commissioning of the HELIAC Power Coupler

454

J. List, K. Aulenbacher, W.A. Barth, M. Basten, C. Burandt, F.D. Dziuba, V. Gettmann, T. Kürzeder, S. Lauber, M. Miski-Oglu, S. Yaramyshev
HIM, Mainz, Germany
K. Aulenbacher, W.A. Barth, F.D. Dziuba, S. Lauber, J. List
KPH, Mainz, Germany
K. Aulenbacher, W.A. Barth, M. Basten, C. Burandt, F.D. Dziuba, V. Gettmann, T. Kürzeder, S. Lauber, J. List, M. Miski-Oglu, S. Yaramyshev
GSI, Darmstadt, Germany
T. Conrad, H. Podlech, M. Schwarz
IAP, Frankfurt am Main, Germany

The superconducting continuous wave (cw) heavy ion HElmholtz LInear ACcelerator (HELIAC) is intended to be built at GSI in Darmstadt. With its high average beam current and repetition rate, the HELIAC is designed to fulfill the requirements of the super heavy element (SHE) research user program and the material sciences community at GSI. The accelerating cavities are of the superconducting Crossbar H-mode (CH) type, developed by GUF. Within the Advanced Demonstrator project, the first cryomodule, consisting of four cavities is scheduled for commissioning with beam in 2023. The former RF power couplers introduced a high heat input into the cryostat. Therefore, the coupler is redesigned at HIM in order to not only reduce the heat input but to provide an overall improved power coupler for the HELIAC. It is designed for maximal power of 5 kW cw at the frequency of 216.816 MHz. A prototype has been tested and commissioned recently. This includes several RF-tests at room temperature and in cryogenic environments. The results of these tests will be presented in this paper.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2022-TUPOPA18

About •

Received ※ 20 August 2022 — Revised ※ 21 August 2022 — Accepted ※ 30 August 2022 — Issue date ※ 01 September 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPOPA19

Preparation for Commissioning with Beam of "Advanced Demonstrator" Module with Heavy Ion Beam

114

M. Miski-Oglu, W.A. Barth, M. Basten, C. Burandt, F.D. Dziuba, T. Kürzeder, S. Lauber, J. List, S. Yaramyshev
HIM, Mainz, Germany
W.A. Barth, M. Basten, C. Burandt, F.D. Dziuba, V. Gettmann, T. Kürzeder, S. Lauber, J. List, S. Yaramyshev
GSI, Darmstadt, Germany
W.A. Barth, F.D. Dziuba, S. Lauber, J. List
KPH, Mainz, Germany
H. Podlech, M. Schwarz
IAP, Frankfurt am Main, Germany

The integration of the accelerator components in to the cryogenic module prototype (Advanced Demonstrator) is a major milestone of the R&D for the superconducting heavy ion continuous wave linear accelerator HELIAC at GSI. The HELIAC is joint project of Helmholtz Institute Mainz (HIM) and GSI developed in collaboration with IAP Goethe University Frankfurt. This module is equipped with three superconducting (sc) Cross bar H-mode (CH) acceleration cavities CH0-CH2 and a sc rebuncher cavity, as well as two sc solenoids. The commissioning of the cryogenic module with Argon beam at GSI is scheduled for August 2023. In preparation for the beam test activities, the beamline, which connects the High Charge State Injector (HLI) with the testing area, has been installed. The beamline comprises a pair of phase probes for Time Of Flight (TOF) measurement of the incoming beam energy, quadrupole lenses and a 4-gap RF-buncher cavity. The beam diagnostics bench behind the cryo module is equipped with phase probe pairs, a slit-grid device, a bunch shape monitor (Feshenko monitor) for measurements of the longitudinal beam profile. The bench allows complete 6d characterization of the ion beam.

Poster MOPOPA19 [3.074 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2022-MOPOPA19

About •

Received ※ 24 August 2022 — Revised ※ 29 August 2022 — Accepted ※ 01 September 2022 — Issue date ※ 04 September 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)