Author: Saeki, T.
Paper Title Page
THPOGE23 Vertical Electro-Polishing of 704 MHz Resonators Using Ninja Cathode: Gradients Over 40 MV/m Achieved on ESS Single-Cell Cavity 844
THOPA08   use link to see paper's listing under its alternate paper code  
  • F. Éozénou, M. Baudrier, E. Cenni, E. Fayette, L. Maurice, C. Servouin
    CEA-DRF-IRFU, France
  • H. Hayano, H. Ito, S. Kato, T. Kubo, H. Monjushiro, T. Saeki
    KEK, Ibaraki, Japan
  • Y.I. Ida, K. Nii, T.Y. Yamaguchi
    MGH, Hyogo-ken, Japan
  • G. Jullien
    CEA-IRFU, Gif-sur-Yvette, France
  CEA, KEK and Marui Galvanizing Company have been collaborating to apply the Vertical Electropolishing (VEP) process of elliptical SRF cavities to a 704MHz single-cell ESS-type cavity, using a rotating so called and patented "Ninja" cathode. First presented results* were promising with a gradient of 27MV/m achieved, without any heat treatment applied. The performance has been pushed further since. The cavity has undergone a heat treatment at 650°C during 10h, followed by a final VEP sequence and a baking at 120°C during 48h hours. The achieved gradient at 2K was 44MV/m (power limitation), and the quality factor Q0 exceeding 5·1010 up to 10 MV/m. The superiority of VEP compared to standard "BCP" chemical treatment is demonstrated and we intend now to scale the process to 5-Cell β=0.86 ESS cavity. We also intend to push further the performance by applying "2-step baking" (75°C and 120°C) proposed by FNAL, which was successfully applied at CEA Saclay on 1300MHz single-cell resonators with gradients above 50MV/m achieved after VEP bulk treatment.
* TUPCAV001, SRF 2021
slides icon Slides THPOGE23 [0.868 MB]  
poster icon Poster THPOGE23 [0.918 MB]  
DOI • reference for this paper ※  
About • Received ※ 24 August 2022 — Revised ※ 01 September 2022 — Accepted ※ 09 September 2022 — Issue date ※ 16 September 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)