LINAC2022 - List of Authors (Rimmer, R.A.)

Paper	Title	Page
TUPOPA30	Innovative Magnetron Power Sources for SRF Linacs	473
TUOPA05	use link to see paper's listing under its alternate paper code
	M. Popovic, M.A. Cummings, A. Dudas, R.P. Johnson, R.R. Lentz, M.L. Neubauer, T. Wynn Muons, Inc, Illinois, USA T. Blassick, J.K. Wessel Richardson Electronics Ltd, Lafox, Illinois, USA K. Jordan, R.A. Rimmer, H. Wang JLab, Newport News, Virginia, USA
	Funding: Supported in part by US Department of Energy Nuclear Physics SBIR Grant DE-SC0022484 Magnetron RF power sources for single cavities can cost much less and operate at much higher efficiency than klystrons, but they do not have the phase and amplitude control, or the lifetime, needed to drive SRF cavities for superconducting particle accelerators. Existing magnetrons that are typically used to study methods of control or lifetime improvements for SRF accelerators are built for much different applications such as kitchen microwave ovens (1kW, 2.45 GHz) or industrial heating (100 kW, 915 MHz). Muons, Inc. is working with Richardson Electronics LLC to develop fast and flexible manufacturing techniques to allow many ideas to be tested for construction variations that enable new phase and amplitude injection locking control methods, longer lifetime, and inexpensive refurbishing resulting in the lowest possible life-cycle costs. A magnetron suitable for 1497 MHz klystron replacements at Jefferson Lab has been designed, constructed, and tested.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2022-TUPOPA30
About •	Received ※ 16 August 2022 — Revised ※ 26 August 2022 — Accepted ※ 29 August 2022 — Issue date ※ 01 September 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOJO21	Higher Order Modes Investigation in the PERLE Superconducting RF Cavity	731
SUPCGE01	use link to see paper's listing under its alternate paper code
	C. Barbagallo, P. Duchesne, W. Kaabi, G. Olry, Z.F. Zomer Université Paris-Saclay, CNRS/IN2P3, IJCLab, Orsay, France R.A. Rimmer, H. Wang JLab, Newport News, Virginia, USA
	The regenerative Beam Break Up (BBU) excited by the dipole Higher Order Modes (HOMs) in superconducting RF (SRF) cavities is a crucial issue for continuous-wave high-current energy recovery linacs. Beam-induced monopole HOMs can increase the cryogenic losses of the linac also. One of the ways to limit these effects is to use HOM couplers on the beam tubes of cavities to absorb and untrap cavity eigenmodes. These couplers feature antennas designed to damp dangerous HOMs and adequately reject the fundamental mode. This study illustrates an investigation of the HOMs of a 5-cell 801.58 MHz elliptical SRF cavity designed for PERLE (Powerful Energy Recovery Linac for Experiments), a multi-turn energy recovery linac (ERL) currently under study and later to be hosted at IJCLab in Orsay. Time-domain wakefield and frequency-domain eigenmode simulations have been used to calculate the cavity broadband HOM impedance spectra and identify the dangerous BBU HOMs. The transmission characteristics of several coaxial HOM couplers have been studied. The efficiencies of several HOM-damping schemes have been compared to propose a HOM endgroup to be fabricated and added to the existing bare SRF cavity.
	Poster THPOJO21 [2.090 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2022-THPOJO21
About •	Received ※ 24 August 2022 — Revised ※ 27 August 2022 — Accepted ※ 01 September 2022 — Issue date ※ 23 September 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOGE18	Design of a 1.3 GHz RF-Dipole Crabbing Cavity for International Linear Collider	832
	S.U. De Silva, J.R. Delayen ODU, Norfolk, Virginia, USA R.A. Rimmer JLab, Newport News, Virginia, USA
	The International Liner Collider (ILC) requires crabbing systems to increase the luminosity of the colliding electron and positron bunches. There are several frequency options for the crabbing cavity. We have designed a 1.3 GHz compact 1-cell and 2-cell rf-dipole crabbing cavity to compensate for luminosity degradation due to large crossing angle. This paper presents the 1-cell and 2-cell cavities designed to meet the current specifications including the fundamental power coupler and higher order mode couplers.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2022-THPOGE18
About •	Received ※ 11 August 2022 — Revised ※ 26 August 2022 — Accepted ※ 01 September 2022 — Issue date ※ 16 September 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

TUPOPA30

Innovative Magnetron Power Sources for SRF Linacs

473

TUOPA05

use link to see paper's listing under its alternate paper code

M. Popovic, M.A. Cummings, A. Dudas, R.P. Johnson, R.R. Lentz, M.L. Neubauer, T. Wynn
Muons, Inc, Illinois, USA
T. Blassick, J.K. Wessel
Richardson Electronics Ltd, Lafox, Illinois, USA
K. Jordan, R.A. Rimmer, H. Wang
JLab, Newport News, Virginia, USA

Funding: Supported in part by US Department of Energy Nuclear Physics SBIR Grant DE-SC0022484
Magnetron RF power sources for single cavities can cost much less and operate at much higher efficiency than klystrons, but they do not have the phase and amplitude control, or the lifetime, needed to drive SRF cavities for superconducting particle accelerators. Existing magnetrons that are typically used to study methods of control or lifetime improvements for SRF accelerators are built for much different applications such as kitchen microwave ovens (1kW, 2.45 GHz) or industrial heating (100 kW, 915 MHz). Muons, Inc. is working with Richardson Electronics LLC to develop fast and flexible manufacturing techniques to allow many ideas to be tested for construction variations that enable new phase and amplitude injection locking control methods, longer lifetime, and inexpensive refurbishing resulting in the lowest possible life-cycle costs. A magnetron suitable for 1497 MHz klystron replacements at Jefferson Lab has been designed, constructed, and tested.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2022-TUPOPA30

About •

Received ※ 16 August 2022 — Revised ※ 26 August 2022 — Accepted ※ 29 August 2022 — Issue date ※ 01 September 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOJO21

Higher Order Modes Investigation in the PERLE Superconducting RF Cavity

731

SUPCGE01

use link to see paper's listing under its alternate paper code

C. Barbagallo, P. Duchesne, W. Kaabi, G. Olry, Z.F. Zomer
Université Paris-Saclay, CNRS/IN2P3, IJCLab, Orsay, France
R.A. Rimmer, H. Wang
JLab, Newport News, Virginia, USA

The regenerative Beam Break Up (BBU) excited by the dipole Higher Order Modes (HOMs) in superconducting RF (SRF) cavities is a crucial issue for continuous-wave high-current energy recovery linacs. Beam-induced monopole HOMs can increase the cryogenic losses of the linac also. One of the ways to limit these effects is to use HOM couplers on the beam tubes of cavities to absorb and untrap cavity eigenmodes. These couplers feature antennas designed to damp dangerous HOMs and adequately reject the fundamental mode. This study illustrates an investigation of the HOMs of a 5-cell 801.58 MHz elliptical SRF cavity designed for PERLE (Powerful Energy Recovery Linac for Experiments), a multi-turn energy recovery linac (ERL) currently under study and later to be hosted at IJCLab in Orsay. Time-domain wakefield and frequency-domain eigenmode simulations have been used to calculate the cavity broadband HOM impedance spectra and identify the dangerous BBU HOMs. The transmission characteristics of several coaxial HOM couplers have been studied. The efficiencies of several HOM-damping schemes have been compared to propose a HOM endgroup to be fabricated and added to the existing bare SRF cavity.

Poster THPOJO21 [2.090 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2022-THPOJO21

About •

Received ※ 24 August 2022 — Revised ※ 27 August 2022 — Accepted ※ 01 September 2022 — Issue date ※ 23 September 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOGE18

Design of a 1.3 GHz RF-Dipole Crabbing Cavity for International Linear Collider

832

S.U. De Silva, J.R. Delayen
ODU, Norfolk, Virginia, USA
R.A. Rimmer
JLab, Newport News, Virginia, USA

The International Liner Collider (ILC) requires crabbing systems to increase the luminosity of the colliding electron and positron bunches. There are several frequency options for the crabbing cavity. We have designed a 1.3 GHz compact 1-cell and 2-cell rf-dipole crabbing cavity to compensate for luminosity degradation due to large crossing angle. This paper presents the 1-cell and 2-cell cavities designed to meet the current specifications including the fundamental power coupler and higher order mode couplers.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2022-THPOGE18

About •

Received ※ 11 August 2022 — Revised ※ 26 August 2022 — Accepted ※ 01 September 2022 — Issue date ※ 16 September 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)