LINAC2022 - List of Authors (Porter, R.D.)

Paper	Title	Page
TU1AA06	Next-Generation Nb₃Sn Superconducting RF Cavities	305
SUPCJO08	use link to see paper's listing under its alternate paper code
	N.M. Verboncoeur, G. Gaitan, M. Liepe, R.D. Porter, L. Shpani, N.A. Stilin, Z. Sun Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
	Nb₃Sn currently is the most promising alternative material for next-generation, higher-performance SRF cavities. Significant recent progress has been made in further increasing efficiency, maximum field, and demonstrating readiness for first applications in actual accelerators. This paper will present an overview of worldwide recent progress in making this material a viable option for further accelerators.
	Slides TU1AA06 [6.559 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2022-TU1AA06
About •	Received ※ 31 August 2022 — Revised ※ 01 September 2022 — Accepted ※ 04 September 2022 — Issue date ※ 09 September 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOPA21	Narrow Bandwidth Active Noise Control for Microphonics Rejection in Superconducting Cavities at LCLS-II	785
SUPCPA06	use link to see paper's listing under its alternate paper code
	A. Bellandi, J. Branlard DESY, Hamburg, Germany S. Aderhold, A.L. Benwell, A. Brachmann, J.A. Diaz Cruz, D. Gonnella, S.L. Hoobler, J. Nelson, A. Ratti, L.M. Zacarias SLAC, Menlo Park, California, USA J.A. Diaz Cruz UNM-ECE, Albuquerque, USA R.D. Porter Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
	LCLS-II is an X-Ray Free Electron Laser (XFEL) under commissioning at SLAC, being the first Continuous Wave (CW) hard XFEL in the world to come into operation. To accelerate the electron beam to an energy of 4 GeV, 280 superconducting cavities of the TESLA types are used. A Loaded Q (QL) value of 4x10⁷ is used to drive the cavities at a power level of a few kilowatts. For this QL value, the RF cavity bandwidth is equal to 32 Hz. Therefore, keeping the cavity resonance frequency within such bandwidth is imperative to avoid a significant increase in the required RF power. In superconducting accelerators, resonance frequency variations are produced by mechanical microphonic vibrations of the cavities. One source of microphonics noise is rotary machinery such as vacuum pumps or HVAC equipment. A possible method to reject these disturbances is to use Narrowband Active Noise Control (NANC) techniques. Such a technique was already tested at DESY/CMTB and Cornell/CBETA. This proceeding presents the implementation of a NANC controller in the LCLS-II Low Level RF (LLRF) control system. Tests on the rejection of LCLS-II microphonics disturbances are also presented.
	Poster THPOPA21 [1.843 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2022-THPOPA21
About •	Received ※ 24 August 2022 — Revised ※ 30 August 2022 — Accepted ※ 02 September 2022 — Issue date ※ 26 September 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOPA15	Anomaly Detection Based Quench Detection System for CW Operation of SRF Cavities	775
	G. Martino, A. Bellandi, J. Branlard, A. Eichler, H. Schlarb DESY, Hamburg, Germany S. Aderhold, A.L. Benwell, D. Gonnella, S.L. Hoobler, J. Nelson, R.D. Porter, A. Ratti, L.M. Zacarias SLAC, Menlo Park, California, USA L.R. Doolittle LBNL, Berkeley, California, USA G. Fey Hamburg University of Technology, Hamburg, Germany
	Funding: This work is supported by DASHH (Data Science in Hamburg - HELMHOLTZ Graduate School for the Structure of Matter) under Grant No.: HIDSS-0002. Superconducting radio frequency (SRF) cavities are used in modern particle accelerators to take advantage of their very high quality factor (Q). A higher Q means that a higher RF field can be sustained, and a higher acceleration can be produced in the cavity for length unity. However, in certain situations, e.g., too high RF field, the SRF cavities can experience quenches that risk creating damage due to the rapid increase in the heat load. This is especially negative in continuous wave (CW) operation due to the impossibility of the system to recover during the off-load period. The design goal of a quench-detection system is to protect the system without being a limiting factor during the operation. In this paper, we compare two different classification approaches for improving a quench detection system. We perform tests using traces recorded from LCLS-II and show that the ARSENAL classifier outperforms a CNN classifier in terms of accuracy.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2022-THPOPA15
About •	Received ※ 24 August 2022 — Accepted ※ 25 August 2022 — Issue date ※ 23 September 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

TU1AA06

Next-Generation Nb₃Sn Superconducting RF Cavities

305

SUPCJO08

use link to see paper's listing under its alternate paper code

N.M. Verboncoeur, G. Gaitan, M. Liepe, R.D. Porter, L. Shpani, N.A. Stilin, Z. Sun
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA

Nb₃Sn currently is the most promising alternative material for next-generation, higher-performance SRF cavities. Significant recent progress has been made in further increasing efficiency, maximum field, and demonstrating readiness for first applications in actual accelerators. This paper will present an overview of worldwide recent progress in making this material a viable option for further accelerators.

Slides TU1AA06 [6.559 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2022-TU1AA06

About •

Received ※ 31 August 2022 — Revised ※ 01 September 2022 — Accepted ※ 04 September 2022 — Issue date ※ 09 September 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOPA21

Narrow Bandwidth Active Noise Control for Microphonics Rejection in Superconducting Cavities at LCLS-II

785

SUPCPA06

use link to see paper's listing under its alternate paper code

A. Bellandi, J. Branlard
DESY, Hamburg, Germany
S. Aderhold, A.L. Benwell, A. Brachmann, J.A. Diaz Cruz, D. Gonnella, S.L. Hoobler, J. Nelson, A. Ratti, L.M. Zacarias
SLAC, Menlo Park, California, USA
J.A. Diaz Cruz
UNM-ECE, Albuquerque, USA
R.D. Porter
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA

LCLS-II is an X-Ray Free Electron Laser (XFEL) under commissioning at SLAC, being the first Continuous Wave (CW) hard XFEL in the world to come into operation. To accelerate the electron beam to an energy of 4 GeV, 280 superconducting cavities of the TESLA types are used. A Loaded Q (QL) value of 4x10⁷ is used to drive the cavities at a power level of a few kilowatts. For this QL value, the RF cavity bandwidth is equal to 32 Hz. Therefore, keeping the cavity resonance frequency within such bandwidth is imperative to avoid a significant increase in the required RF power. In superconducting accelerators, resonance frequency variations are produced by mechanical microphonic vibrations of the cavities. One source of microphonics noise is rotary machinery such as vacuum pumps or HVAC equipment. A possible method to reject these disturbances is to use Narrowband Active Noise Control (NANC) techniques. Such a technique was already tested at DESY/CMTB and Cornell/CBETA. This proceeding presents the implementation of a NANC controller in the LCLS-II Low Level RF (LLRF) control system. Tests on the rejection of LCLS-II microphonics disturbances are also presented.

Poster THPOPA21 [1.843 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2022-THPOPA21

About •

Received ※ 24 August 2022 — Revised ※ 30 August 2022 — Accepted ※ 02 September 2022 — Issue date ※ 26 September 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOPA15

Anomaly Detection Based Quench Detection System for CW Operation of SRF Cavities

775

G. Martino, A. Bellandi, J. Branlard, A. Eichler, H. Schlarb
DESY, Hamburg, Germany
S. Aderhold, A.L. Benwell, D. Gonnella, S.L. Hoobler, J. Nelson, R.D. Porter, A. Ratti, L.M. Zacarias
SLAC, Menlo Park, California, USA
L.R. Doolittle
LBNL, Berkeley, California, USA
G. Fey
Hamburg University of Technology, Hamburg, Germany

Funding: This work is supported by DASHH (Data Science in Hamburg - HELMHOLTZ Graduate School for the Structure of Matter) under Grant No.: HIDSS-0002.
Superconducting radio frequency (SRF) cavities are used in modern particle accelerators to take advantage of their very high quality factor (Q). A higher Q means that a higher RF field can be sustained, and a higher acceleration can be produced in the cavity for length unity. However, in certain situations, e.g., too high RF field, the SRF cavities can experience quenches that risk creating damage due to the rapid increase in the heat load. This is especially negative in continuous wave (CW) operation due to the impossibility of the system to recover during the off-load period. The design goal of a quench-detection system is to protect the system without being a limiting factor during the operation. In this paper, we compare two different classification approaches for improving a quench detection system. We perform tests using traces recorded from LCLS-II and show that the ARSENAL classifier outperforms a CNN classifier in terms of accuracy.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2022-THPOPA15

About •

Received ※ 24 August 2022 — Accepted ※ 25 August 2022 — Issue date ※ 23 September 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)