LINAC2022 - List of Authors (Knebel, K.)

Paper	Title	Page
THPOJO03	RF Performance of a Next-Generation L-Band RF Gun at PITZ	699
	M. Krasilnikov, Z. Aboulbanine, G.D. Adhikari, N. Aftab, P. Boonpornprasert, M.E. Castro Carballo, G.Z. Georgiev, J. Good, M. Groß, A. Hoffmann, C. Koschitzki, X.-K. Li, A. Lueangaramwong, D. Melkumyan, R. Niemczyk, A. Oppelt, B. Petrosyan, S. Philipp, M. Pohl, H.J. Qian, C.J. Richard, J. Schultze, F. Stephan, G. Vashchenko, T. Weilbach DESY Zeuthen, Zeuthen, Germany M. Bousonville, F. Brinker, M. Hoffmann, K. Knebel, D. Kostin, S. Lederer, L. Lilje, S. Pfeiffer, R. Ritter, S. Schreiber, H. Weise, J. Ziegler DESY, Hamburg, Germany G. Shu IHEP, Beijing, People’s Republic of China M. Wenskat University of Hamburg, Institut für Experimentalphysik, Hamburg, Germany
	A new generation of normal conducting 1.3GHz RF gun was developed to provide a high-quality electron source for superconducting linac driven free-electron lasers like FLASH and European XFEL. Compared to the Gun4 series, Gun5 aims for a 50% increase of the duration of the RF pulse (up to 1 ms at 10 Hz repetition rate) combined with high gradients (up to ~60 MV/m at the cathode). In addition to the improved impedance, the new cavity is equipped with an RF probe to measure and control the amplitude and phase of the RF field inside the gun. The first prototype of the new RF gun was manufactured at DESY and installed at the Photo Injector Test facility at DESY in Zeuthen (PITZ) in October 2021. In mid-October 2021 the RF conditioning began, aiming for achieving the aforementioned RF parameters. The conditioning procedure involves a slow gradual increase in repetition rate, RF pulse duration and peak power while carefully monitoring vacuum conditions and signals from interlock sensors. The results of RF conditioning will be reported.
	Poster THPOJO03 [2.241 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2022-THPOJO03
About •	Received ※ 26 August 2022 — Revised ※ 31 August 2022 — Accepted ※ 03 September 2022 — Issue date ※ 15 September 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

RF Performance of a Next-Generation L-Band RF Gun at PITZ

699

M. Krasilnikov, Z. Aboulbanine, G.D. Adhikari, N. Aftab, P. Boonpornprasert, M.E. Castro Carballo, G.Z. Georgiev, J. Good, M. Groß, A. Hoffmann, C. Koschitzki, X.-K. Li, A. Lueangaramwong, D. Melkumyan, R. Niemczyk, A. Oppelt, B. Petrosyan, S. Philipp, M. Pohl, H.J. Qian, C.J. Richard, J. Schultze, F. Stephan, G. Vashchenko, T. Weilbach
DESY Zeuthen, Zeuthen, Germany
M. Bousonville, F. Brinker, M. Hoffmann, K. Knebel, D. Kostin, S. Lederer, L. Lilje, S. Pfeiffer, R. Ritter, S. Schreiber, H. Weise, J. Ziegler
DESY, Hamburg, Germany
G. Shu
IHEP, Beijing, People’s Republic of China
M. Wenskat
University of Hamburg, Institut für Experimentalphysik, Hamburg, Germany

A new generation of normal conducting 1.3GHz RF gun was developed to provide a high-quality electron source for superconducting linac driven free-electron lasers like FLASH and European XFEL. Compared to the Gun4 series, Gun5 aims for a 50% increase of the duration of the RF pulse (up to 1 ms at 10 Hz repetition rate) combined with high gradients (up to ~60 MV/m at the cathode). In addition to the improved impedance, the new cavity is equipped with an RF probe to measure and control the amplitude and phase of the RF field inside the gun. The first prototype of the new RF gun was manufactured at DESY and installed at the Photo Injector Test facility at DESY in Zeuthen (PITZ) in October 2021. In mid-October 2021 the RF conditioning began, aiming for achieving the aforementioned RF parameters. The conditioning procedure involves a slow gradual increase in repetition rate, RF pulse duration and peak power while carefully monitoring vacuum conditions and signals from interlock sensors. The results of RF conditioning will be reported.

Poster THPOJO03 [2.241 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2022-THPOJO03

About •

Received ※ 26 August 2022 — Revised ※ 31 August 2022 — Accepted ※ 03 September 2022 — Issue date ※ 15 September 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)