LINAC2022 - List of Authors (Kapin, V.V.)

Paper	Title	Page
MOPOGE15	Operation of the H⁻ Linac at FNAL	184
	K. Seiya, T.A. Butler, A. Hartman, D.C. Jones, V.V. Kapin, S. Moua, J.-F. Ostiguy, R. Ridgway, R.V. Sharankova, B.S. Stanzil, C.-Y. Tan, M.E. Wesley Fermilab, Batavia, Illinois, USA M.W. Mwaniki IIT, Chicago, Illinois, USA
	The Fermi National Accelerator Laboratory (FNAL) Linac has been in operation for 52 years. the Linac delivers H⁻ ions at 400 MeV and injects protons by charge exchange into the Booster synchrotron. Despite its age, the Linac is the most stable accelerator in the FNAL complex, reliably sending 22 mA in daily operations. We will discuss the status of the operation, beam studies, and plans.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2022-MOPOGE15
About •	Received ※ 16 August 2022 — Revised ※ 19 August 2022 — Accepted ※ 01 September 2022 — Issue date ※ 11 September 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPORI23	Investigation of the Beam Propagation Through the FNAL LEBT	597
	D.C. Jones, D.S. Bollinger, V.V. Kapin, K. Seiya Fermilab, Batavia, Illinois, USA
	Fermilab Preaccelerator sends 25 mA H⁻ beam with a 30 µs pulse length at 15 Hz. The machine’s uptime was increased in 2012 by the replacement of the Cockcroft Walton accelerator with an RFQ system to take the beam from 35 keV to 750 keV; however, this came with a reduction in transmitted beam between the source and the entrance to Tank 1 of the LINAC. Fermilab currently operates with less than 50% of the beam current from the ion source making it to the entrance of tank 1. In an effort to understand the causes of this reduction in transmission efficiency a vertically movable paddle was installed between the first two solenoids allowing the beam size to be investigated before entering the RFQ. Comparing this data to the emittance measurements done after the first solenoid in the Ion Source R&D lab a more complete picture of the beams propagation through the LEBT has begun to be established when compared with the simulation results. We will present these results here.
	Poster TUPORI23 [0.510 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2022-TUPORI23
About •	Received ※ 14 August 2022 — Revised ※ 19 August 2022 — Accepted ※ 30 August 2022 — Issue date ※ 15 September 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Operation of the H⁻ Linac at FNAL

184

K. Seiya, T.A. Butler, A. Hartman, D.C. Jones, V.V. Kapin, S. Moua, J.-F. Ostiguy, R. Ridgway, R.V. Sharankova, B.S. Stanzil, C.-Y. Tan, M.E. Wesley
Fermilab, Batavia, Illinois, USA
M.W. Mwaniki
IIT, Chicago, Illinois, USA

The Fermi National Accelerator Laboratory (FNAL) Linac has been in operation for 52 years. the Linac delivers H⁻ ions at 400 MeV and injects protons by charge exchange into the Booster synchrotron. Despite its age, the Linac is the most stable accelerator in the FNAL complex, reliably sending 22 mA in daily operations. We will discuss the status of the operation, beam studies, and plans.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2022-MOPOGE15

About •

Received ※ 16 August 2022 — Revised ※ 19 August 2022 — Accepted ※ 01 September 2022 — Issue date ※ 11 September 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPORI23

Investigation of the Beam Propagation Through the FNAL LEBT

597

D.C. Jones, D.S. Bollinger, V.V. Kapin, K. Seiya
Fermilab, Batavia, Illinois, USA

Fermilab Preaccelerator sends 25 mA H⁻ beam with a 30 µs pulse length at 15 Hz. The machine’s uptime was increased in 2012 by the replacement of the Cockcroft Walton accelerator with an RFQ system to take the beam from 35 keV to 750 keV; however, this came with a reduction in transmitted beam between the source and the entrance to Tank 1 of the LINAC. Fermilab currently operates with less than 50% of the beam current from the ion source making it to the entrance of tank 1. In an effort to understand the causes of this reduction in transmission efficiency a vertically movable paddle was installed between the first two solenoids allowing the beam size to be investigated before entering the RFQ. Comparing this data to the emittance measurements done after the first solenoid in the Ion Source R&D lab a more complete picture of the beams propagation through the LEBT has begun to be established when compared with the simulation results. We will present these results here.

Poster TUPORI23 [0.510 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2022-TUPORI23

About •

Received ※ 14 August 2022 — Revised ※ 19 August 2022 — Accepted ※ 30 August 2022 — Issue date ※ 15 September 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)