LINAC2022 - List of Authors (Gammino, S.)

Paper	Title	Page
THPORI19	HSMDIS Performance on the ESS Ion Source	863
THOPA10	use link to see paper's listing under its alternate paper code
	L. Neri, G. Castro, L. Celona, S. Gammino, O. Leonardi, A. Miraglia INFN/LNS, Catania, Italy C. Baltador, L. Bellan, M. Comunian, F. Grespan INFN/LNL, Legnaro (PD), Italy B. Jones, E. Laface, R. Miyamoto, A.G. Sosa ESS, Lund, Sweden
	The ESS ion source, developed at INFN-LNS and installed at the ESS facility, is fully working and in operation for the linac beam commissioning. The commissioning of the source was done in Catania and in Lund showing high reproducibility related to the beam diagnostic parameters that can be measured with the subset of equipment currently available in Lund. The analysis of the data collected during the commissioning in Catania discloses the possibility to use a new source configuration named High Stability Microwave Discharge Ion Source (HSMDIS), able to improve beam stability and lower the beam emittance. This paper shows the capability to increase the beam current intensity, with preserving beam stability, by changing only the microwave power. Linearity was tested from 10 to 120 mA to be able to provide the lower values needed for the different phases of the accelerator commissioning and higher values for future accelerator development. The source stability is evaluated through intra-pulse stability and pulse-to-pulse stability. Reference: L. Neri, L. Celona "High stability microwave discharge ion sources" Sci Rep 12, 3064 (2022). https://doi.org/10.1038/s41598-022-06937-7
	Slides THPORI19 [37.408 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2022-THPORI19
About •	Received ※ 24 August 2022 — Revised ※ 29 August 2022 — Accepted ※ 01 September 2022 — Issue date ※ 16 September 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

THPORI19

HSMDIS Performance on the ESS Ion Source

863

THOPA10

use link to see paper's listing under its alternate paper code

L. Neri, G. Castro, L. Celona, S. Gammino, O. Leonardi, A. Miraglia
INFN/LNS, Catania, Italy
C. Baltador, L. Bellan, M. Comunian, F. Grespan
INFN/LNL, Legnaro (PD), Italy
B. Jones, E. Laface, R. Miyamoto, A.G. Sosa
ESS, Lund, Sweden

The ESS ion source, developed at INFN-LNS and installed at the ESS facility, is fully working and in operation for the linac beam commissioning. The commissioning of the source was done in Catania and in Lund showing high reproducibility related to the beam diagnostic parameters that can be measured with the subset of equipment currently available in Lund. The analysis of the data collected during the commissioning in Catania discloses the possibility to use a new source configuration named High Stability Microwave Discharge Ion Source (HSMDIS), able to improve beam stability and lower the beam emittance. This paper shows the capability to increase the beam current intensity, with preserving beam stability, by changing only the microwave power. Linearity was tested from 10 to 120 mA to be able to provide the lower values needed for the different phases of the accelerator commissioning and higher values for future accelerator development. The source stability is evaluated through intra-pulse stability and pulse-to-pulse stability.
Reference:
L. Neri, L. Celona "High stability microwave discharge ion sources" Sci Rep 12, 3064 (2022). https://doi.org/10.1038/s41598-022-06937-7

Slides THPORI19 [37.408 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2022-THPORI19

About •

Received ※ 24 August 2022 — Revised ※ 29 August 2022 — Accepted ※ 01 September 2022 — Issue date ※ 16 September 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)