LINAC2022 - List of Authors (Forck, P.)

Paper	Title	Page
TUPOJO06	Design and Test of Beam Diagnostics Equipment for the FAIR Proton Linac	348
	T. Sieber, P. Forck, C.M. Kleffner, S. Udrea GSI, Darmstadt, Germany I. Bustinduy, Á. Rodríguez Páramo ESS Bilbao, Zamudio, Spain J. Herranz Proactive Research and Development, Sabadell, Spain A. Navarro Fernandez CERN, Meyrin, Switzerland
	A dedicated proton injector Linac (pLinac) for the Facility of Antiproton and Ion Research (FAIR) at GSI, Darmstadt, is currently under construction. It will pro-vide a 68 MeV, up to 70 mA proton beam at a duty cycle of max. 35µs / 4 Hz for the SIS18 synchrotron, using the UNILAC transfer beamline. After further acceleration in SIS100, the protons are mainly used for antiproton production at the Antiproton Annihilation Darmstadt (PANDA) experiment. The Linac will operate at 325 MHz and consists of a novel so called ’Ladder’ RFQ type, followed by a chain of CH-cavities, partially coupled by rf-coupling cells. In this paper we present the beam diagnostics system for the pLinac with special emphasis on the Secondary Electron Emission (SEM) Grids and the Beam Position Monitor (BPM) system. We also describe design and status of our diagnostics testbench for stepwise Linac commissioning, which includes an energy spectrometer with associated optical system. The BPMs and SEM grids have been tested with proton and argon beam during several beamtimes in 2022. The results of these experiments are presented.
	Poster TUPOJO06 [3.264 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2022-TUPOJO06
About •	Received ※ 24 August 2022 — Revised ※ 01 September 2022 — Accepted ※ 02 September 2022 — Issue date ※ 07 September 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Design and Test of Beam Diagnostics Equipment for the FAIR Proton Linac

348

T. Sieber, P. Forck, C.M. Kleffner, S. Udrea
GSI, Darmstadt, Germany
I. Bustinduy, Á. Rodríguez Páramo
ESS Bilbao, Zamudio, Spain
J. Herranz
Proactive Research and Development, Sabadell, Spain
A. Navarro Fernandez
CERN, Meyrin, Switzerland

A dedicated proton injector Linac (pLinac) for the Facility of Antiproton and Ion Research (FAIR) at GSI, Darmstadt, is currently under construction. It will pro-vide a 68 MeV, up to 70 mA proton beam at a duty cycle of max. 35µs / 4 Hz for the SIS18 synchrotron, using the UNILAC transfer beamline. After further acceleration in SIS100, the protons are mainly used for antiproton production at the Antiproton Annihilation Darmstadt (PANDA) experiment. The Linac will operate at 325 MHz and consists of a novel so called ’Ladder’ RFQ type, followed by a chain of CH-cavities, partially coupled by rf-coupling cells. In this paper we present the beam diagnostics system for the pLinac with special emphasis on the Secondary Electron Emission (SEM) Grids and the Beam Position Monitor (BPM) system. We also describe design and status of our diagnostics testbench for stepwise Linac commissioning, which includes an energy spectrometer with associated optical system. The BPMs and SEM grids have been tested with proton and argon beam during several beamtimes in 2022. The results of these experiments are presented.

Poster TUPOJO06 [3.264 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2022-TUPOJO06

About •

Received ※ 24 August 2022 — Revised ※ 01 September 2022 — Accepted ※ 02 September 2022 — Issue date ※ 07 September 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)