LINAC2022 - List of Authors (Chatelet, F.)

Paper	Title	Page
TUPOJO23	Accelerated Lifetime Test of Spoke Cavity Cold Tuning Systems for Myrrha	406
	N. Gandolfo, S. Blivet, F. Chatelet, V. Delpech, D. Le Dréan, G. Mavilla, M. Pierens, H. Saugnac Université Paris-Saclay, CNRS/IN2P3, IJCLab, Orsay, France
	Within the framework of MINERVA, the first Phase of MYRRHA (Multi-purpose hYbrid Research Reactor for High-tech Applications) project, IN2P3 labs are in charge of the developments of several accelerator elements. Among those, a fully equipped Spoke cryomodule prototype was constructed, it integrates two superconducting single spoke cavities operating at 2K, the RF power couplers and the associated cold tuning systems. The extreme reliability specified for this project motivated to conduct ALT (Accelerated Lifetime Test) on two extra cold tuning systems in cryomodule like environment. Thus, by gathering information from experimental data, many aspects can be enhanced like maintenance plan consolidation, determination of aging indicators and design optimization of the whole system and its sub components. This paper describes the complete ALT process from the studying elements and the test environment design, to the experimental results and findings.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2022-TUPOJO23
About •	Received ※ 15 August 2022 — Revised ※ 17 August 2022 — Accepted ※ 01 September 2022 — Issue date ※ 02 September 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPOGE04	An Approach for Component-Level Analysis of Cryogenic Process in Superconducting LINAC Cryomodules	487
SUPCJO03	use link to see paper's listing under its alternate paper code
	C. Lhomme IJCLab, ORSAY, France D. Berkowitz Zamora, M.D. Grosso Xavier SCK•CEN, Brussels, Belgium F. Chatelet, P. Duthil, H. Saugnac Université Paris-Saclay, CNRS/IN2P3, IJCLab, Orsay, France F. Dieudegard, C. Lhomme ACS, Orsay, France T. Junquera Accelerators and Cryogenic Systems, Orsay, France
	Powerful superconducting linear accelerators feature accelerating sections consisting in a series of cryomod-ules (CM), each hosting superconducting radiofrequency (SRF) cavities cooled by a cryogenic process. Despite the extensive instrumentation used for the tests and valida-tion of the prototype cryomodules, it is usually very complex to link the measured global thermodynamic efficiency to the individual component performance. Previous works showed methods for assessing the global efficiency and even for allocating performances to sets of components, but few went down to a component level. For that purpose, we developed a set of techniques based on customized instrumentation, on dedicated test proto-cols, and on model-based analysis tools. In practice, we exposed the components to various operating conditions and we compared the measured data to the results from a detailed dynamic component model at the same condi-tions. This method was applied to the cryogenic debug-ging phase of the tests of the MINERVA prototype cry-omodule, which, despite the liquid helium shortage, led to an extensively detailed characterisation, for its valida-tion towards the serial construction.
	Poster TUPOGE04 [1.234 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2022-TUPOGE04
About •	Received ※ 20 August 2022 — Revised ※ 21 August 2022 — Accepted ※ 29 August 2022 — Issue date ※ 01 September 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Accelerated Lifetime Test of Spoke Cavity Cold Tuning Systems for Myrrha

406

N. Gandolfo, S. Blivet, F. Chatelet, V. Delpech, D. Le Dréan, G. Mavilla, M. Pierens, H. Saugnac
Université Paris-Saclay, CNRS/IN2P3, IJCLab, Orsay, France

Within the framework of MINERVA, the first Phase of MYRRHA (Multi-purpose hYbrid Research Reactor for High-tech Applications) project, IN2P3 labs are in charge of the developments of several accelerator elements. Among those, a fully equipped Spoke cryomodule prototype was constructed, it integrates two superconducting single spoke cavities operating at 2K, the RF power couplers and the associated cold tuning systems. The extreme reliability specified for this project motivated to conduct ALT (Accelerated Lifetime Test) on two extra cold tuning systems in cryomodule like environment. Thus, by gathering information from experimental data, many aspects can be enhanced like maintenance plan consolidation, determination of aging indicators and design optimization of the whole system and its sub components. This paper describes the complete ALT process from the studying elements and the test environment design, to the experimental results and findings.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2022-TUPOJO23

About •

Received ※ 15 August 2022 — Revised ※ 17 August 2022 — Accepted ※ 01 September 2022 — Issue date ※ 02 September 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPOGE04

An Approach for Component-Level Analysis of Cryogenic Process in Superconducting LINAC Cryomodules

487

SUPCJO03

use link to see paper's listing under its alternate paper code

C. Lhomme
IJCLab, ORSAY, France
D. Berkowitz Zamora, M.D. Grosso Xavier
SCK•CEN, Brussels, Belgium
F. Chatelet, P. Duthil, H. Saugnac
Université Paris-Saclay, CNRS/IN2P3, IJCLab, Orsay, France
F. Dieudegard, C. Lhomme
ACS, Orsay, France
T. Junquera
Accelerators and Cryogenic Systems, Orsay, France

Powerful superconducting linear accelerators feature accelerating sections consisting in a series of cryomod-ules (CM), each hosting superconducting radiofrequency (SRF) cavities cooled by a cryogenic process. Despite the extensive instrumentation used for the tests and valida-tion of the prototype cryomodules, it is usually very complex to link the measured global thermodynamic efficiency to the individual component performance. Previous works showed methods for assessing the global efficiency and even for allocating performances to sets of components, but few went down to a component level. For that purpose, we developed a set of techniques based on customized instrumentation, on dedicated test proto-cols, and on model-based analysis tools. In practice, we exposed the components to various operating conditions and we compared the measured data to the results from a detailed dynamic component model at the same condi-tions. This method was applied to the cryogenic debug-ging phase of the tests of the MINERVA prototype cry-omodule, which, despite the liquid helium shortage, led to an extensively detailed characterisation, for its valida-tion towards the serial construction.

Poster TUPOGE04 [1.234 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2022-TUPOGE04

About •

Received ※ 20 August 2022 — Revised ※ 21 August 2022 — Accepted ※ 29 August 2022 — Issue date ※ 01 September 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)