Paper | Title | Page |
---|---|---|
MO2AA02 |
LCLS-II Commissioning | |
|
||
The LCLS-II CW 4 GeV SRF linac will be commissioned during the Spring of 2022. Progress and challenges will be described. | ||
|
||
please see instructions how to view/control embeded videos | ||
Slides MO2AA02 [8.099 MB] | ||
Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
THPOPA21 | Narrow Bandwidth Active Noise Control for Microphonics Rejection in Superconducting Cavities at LCLS-II | 785 |
SUPCPA06 | use link to see paper's listing under its alternate paper code | |
|
||
LCLS-II is an X-Ray Free Electron Laser (XFEL) under commissioning at SLAC, being the first Continuous Wave (CW) hard XFEL in the world to come into operation. To accelerate the electron beam to an energy of 4 GeV, 280 superconducting cavities of the TESLA types are used. A Loaded Q (QL) value of 4x107 is used to drive the cavities at a power level of a few kilowatts. For this QL value, the RF cavity bandwidth is equal to 32 Hz. Therefore, keeping the cavity resonance frequency within such bandwidth is imperative to avoid a significant increase in the required RF power. In superconducting accelerators, resonance frequency variations are produced by mechanical microphonic vibrations of the cavities. One source of microphonics noise is rotary machinery such as vacuum pumps or HVAC equipment. A possible method to reject these disturbances is to use Narrowband Active Noise Control (NANC) techniques. Such a technique was already tested at DESY/CMTB and Cornell/CBETA. This proceeding presents the implementation of a NANC controller in the LCLS-II Low Level RF (LLRF) control system. Tests on the rejection of LCLS-II microphonics disturbances are also presented. | ||
Poster THPOPA21 [1.843 MB] | ||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2022-THPOPA21 | |
About • | Received ※ 24 August 2022 — Revised ※ 30 August 2022 — Accepted ※ 02 September 2022 — Issue date ※ 26 September 2022 | |
Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |