LINAC2022 - List of Authors (Wenskat, M.)

Paper	Title	Page
THPOJO03	RF Performance of a Next-Generation L-Band RF Gun at PITZ	699
	M. Krasilnikov, Z. Aboulbanine, G.D. Adhikari, N. Aftab, P. Boonpornprasert, M.E. Castro Carballo, G.Z. Georgiev, J. Good, M. Groß, A. Hoffmann, C. Koschitzki, X.-K. Li, A. Lueangaramwong, D. Melkumyan, R. Niemczyk, A. Oppelt, B. Petrosyan, S. Philipp, M. Pohl, H.J. Qian, C.J. Richard, J. Schultze, F. Stephan, G. Vashchenko, T. Weilbach DESY Zeuthen, Zeuthen, Germany M. Bousonville, F. Brinker, M. Hoffmann, K. Knebel, D. Kostin, S. Lederer, L. Lilje, S. Pfeiffer, R. Ritter, S. Schreiber, H. Weise, J. Ziegler DESY, Hamburg, Germany G. Shu IHEP, Beijing, People’s Republic of China M. Wenskat University of Hamburg, Institut für Experimentalphysik, Hamburg, Germany
	A new generation of normal conducting 1.3GHz RF gun was developed to provide a high-quality electron source for superconducting linac driven free-electron lasers like FLASH and European XFEL. Compared to the Gun4 series, Gun5 aims for a 50% increase of the duration of the RF pulse (up to 1 ms at 10 Hz repetition rate) combined with high gradients (up to ~60 MV/m at the cathode). In addition to the improved impedance, the new cavity is equipped with an RF probe to measure and control the amplitude and phase of the RF field inside the gun. The first prototype of the new RF gun was manufactured at DESY and installed at the Photo Injector Test facility at DESY in Zeuthen (PITZ) in October 2021. In mid-October 2021 the RF conditioning began, aiming for achieving the aforementioned RF parameters. The conditioning procedure involves a slow gradual increase in repetition rate, RF pulse duration and peak power while carefully monitoring vacuum conditions and signals from interlock sensors. The results of RF conditioning will be reported.
	Poster THPOJO03 [2.241 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2022-THPOJO03
About •	Received ※ 26 August 2022 — Revised ※ 31 August 2022 — Accepted ※ 03 September 2022 — Issue date ※ 15 September 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOGE22	Medium Temperature Treatments of Superconducting Radio Frequency Cavities at DESY	840
THOPA07	use link to see paper's listing under its alternate paper code
	L. Steder, C. Bate, H. Remde, D. Reschke, J. Schaffran, L. Trelle, H. Weise, M. Wiencek DESY, Hamburg, Germany M. Wenskat University of Hamburg, Institut für Experimentalphysik, Hamburg, Germany
	Over the last years several different approaches to increase the performance of superconducting radio frequency (SRF) cavities by heat treatments have been developed and tested. At DESY, the R&D aims for cavities with enlarged quality factors while maintaining high accelerating gradients, since an envisaged upgrade of the European XFEL requires both. For this purpose, medium temperature (mid-T) treatments around 300 °C seem to be very promising. Lately, the furnace infrastructure at DESY was refurbished and now a niobium-retort furnace capable of carrying 1.3 GHz nine-cell cavities can be used for R&D studies. Vertical test results of single-cell cavities treated in this furnace at medium temperatures are presented and compared to four cavities treated similarly in a furnace at the company Zanon Research & Innovation Srl (Zanon). All mentioned cavities show enlarged quality factors but at the same time reduced gradients compared to their reference measurements before the mid-T treatment. The DESY treatments were accompanied by small niobium samples for surface analyses, which are also presented. Furthermore, the influence of post-treatment high pressure water rinsings is studied.
	Slides THPOGE22 [1.277 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2022-THPOGE22
About •	Received ※ 19 August 2022 — Revised ※ 23 August 2022 — Accepted ※ 27 August 2022 — Issue date ※ 15 September 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

RF Performance of a Next-Generation L-Band RF Gun at PITZ

699

M. Krasilnikov, Z. Aboulbanine, G.D. Adhikari, N. Aftab, P. Boonpornprasert, M.E. Castro Carballo, G.Z. Georgiev, J. Good, M. Groß, A. Hoffmann, C. Koschitzki, X.-K. Li, A. Lueangaramwong, D. Melkumyan, R. Niemczyk, A. Oppelt, B. Petrosyan, S. Philipp, M. Pohl, H.J. Qian, C.J. Richard, J. Schultze, F. Stephan, G. Vashchenko, T. Weilbach
DESY Zeuthen, Zeuthen, Germany
M. Bousonville, F. Brinker, M. Hoffmann, K. Knebel, D. Kostin, S. Lederer, L. Lilje, S. Pfeiffer, R. Ritter, S. Schreiber, H. Weise, J. Ziegler
DESY, Hamburg, Germany
G. Shu
IHEP, Beijing, People’s Republic of China
M. Wenskat
University of Hamburg, Institut für Experimentalphysik, Hamburg, Germany

A new generation of normal conducting 1.3GHz RF gun was developed to provide a high-quality electron source for superconducting linac driven free-electron lasers like FLASH and European XFEL. Compared to the Gun4 series, Gun5 aims for a 50% increase of the duration of the RF pulse (up to 1 ms at 10 Hz repetition rate) combined with high gradients (up to ~60 MV/m at the cathode). In addition to the improved impedance, the new cavity is equipped with an RF probe to measure and control the amplitude and phase of the RF field inside the gun. The first prototype of the new RF gun was manufactured at DESY and installed at the Photo Injector Test facility at DESY in Zeuthen (PITZ) in October 2021. In mid-October 2021 the RF conditioning began, aiming for achieving the aforementioned RF parameters. The conditioning procedure involves a slow gradual increase in repetition rate, RF pulse duration and peak power while carefully monitoring vacuum conditions and signals from interlock sensors. The results of RF conditioning will be reported.

Poster THPOJO03 [2.241 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2022-THPOJO03

About •

Received ※ 26 August 2022 — Revised ※ 31 August 2022 — Accepted ※ 03 September 2022 — Issue date ※ 15 September 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOGE22

Medium Temperature Treatments of Superconducting Radio Frequency Cavities at DESY

840

THOPA07

use link to see paper's listing under its alternate paper code

L. Steder, C. Bate, H. Remde, D. Reschke, J. Schaffran, L. Trelle, H. Weise, M. Wiencek
DESY, Hamburg, Germany
M. Wenskat
University of Hamburg, Institut für Experimentalphysik, Hamburg, Germany

Over the last years several different approaches to increase the performance of superconducting radio frequency (SRF) cavities by heat treatments have been developed and tested. At DESY, the R&D aims for cavities with enlarged quality factors while maintaining high accelerating gradients, since an envisaged upgrade of the European XFEL requires both. For this purpose, medium temperature (mid-T) treatments around 300 °C seem to be very promising. Lately, the furnace infrastructure at DESY was refurbished and now a niobium-retort furnace capable of carrying 1.3 GHz nine-cell cavities can be used for R&D studies. Vertical test results of single-cell cavities treated in this furnace at medium temperatures are presented and compared to four cavities treated similarly in a furnace at the company Zanon Research & Innovation Srl (Zanon). All mentioned cavities show enlarged quality factors but at the same time reduced gradients compared to their reference measurements before the mid-T treatment. The DESY treatments were accompanied by small niobium samples for surface analyses, which are also presented. Furthermore, the influence of post-treatment high pressure water rinsings is studied.

Slides THPOGE22 [1.277 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2022-THPOGE22

About •

Received ※ 19 August 2022 — Revised ※ 23 August 2022 — Accepted ※ 27 August 2022 — Issue date ※ 15 September 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)