Author: Hounsell, B.
Paper Title Page
THPOJO26 Conceptual Design of the PERLE Injector 743
 
  • B. Hounsell, M. Klein, C.P. Welsch
    The University of Liverpool, Liverpool, United Kingdom
  • B. Hounsell, B.L. Militsyn, C.P. Welsch
    Cockcroft Institute, Warrington, Cheshire, United Kingdom
  • B. Hounsell, W. Kaabi
    Université Paris-Saclay, CNRS/IN2P3, IJCLab, Orsay, France
  • B.L. Militsyn
    STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
 
  Energy Recovery Linacs such as PERLE require high average current high brightness beams. This sets particular requirements on the kind of injectors that they can use as the injectors must be capable of producing bunches at MHz repetition rates, compressing the bunches to the specified value and transporting those bunches while they are still in the space charge dominated regime into the main ERL all while keeping the emittance low. In particular, PERLE will require a 20 mA beam consisting of 500 pC bunches with a repetition rate of 40 MHz. These bunches will be required to have rms lengths of 3mm, a total beam energy of 7 MeV, appropriate Twiss parameters to match them to the main loop and transverse emittances of < 6 mm mrad. In this paper, a DC gun based injector capable of meeting this specification will be presented with beam dynamics simulation showing the behaviour of the beam from the photocathode to the exit of the first main linac pass. The beam dynamics challenges will be discussed in terms of both the transverse emittance growth and the sources of non-linearity in the longitudinal phase space.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2022-THPOJO26  
About • Received ※ 20 August 2022 — Revised ※ 24 August 2022 — Accepted ※ 01 September 2022 — Issue date ※ 15 September 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)