Author: Aciksoz, S.
Paper Title Page
TUPORI17 Emittance Measurement from the Proton Testbeam at KAHVELab 581
SUPCPA09   use link to see paper's listing under its alternate paper code  
 
  • D. Halis
    YTU, Istanbul, Turkey
  • S. Aciksoz, E.V. Ozcan
    Bogazici University, Bebek / Istanbul, Turkey
  • A. Adiguzel, S. Esen, S. Oz
    Istanbul University, Istanbul, Turkey
  • H. Cetinkaya
    Dumlupinar University, Faculty of Science and Arts, Kutahya, Turkey
  • T.B. Ilhan
    Bogaziçi University, Kandilli Accelerator, Istanbul, Turkey
  • A. Kilicgedik
    Marmara University, Istanbul, Turkey
  • S. Ogur
    Université Paris-Saclay, CNRS/IN2P3, IJCLab, Orsay, France
  • G. Unel
    UCI, Irvine, California, USA
 
  Funding: This study is supported by Istanbul University Scientific Research Commission Project ID 33250 and TUBITAK Project no : 119M774.
A testbeam using a Radio Frequency Quadrupole (RFQ) operating at 800 MHz, to accelerate a 1.5mA proton beam to 2MeV energy has been designed, manufactured and is currently being commissioned at KAHVELab, Istanbul. The beam from the microwave discharge ion source (IS) must be matched to the RFQ via an optimized Low Energy Beam Transport (LEBT) line. The LEBT line consists of two solenoid magnets, two stereer magnets and a beam diagnostics station named MBOX. All the beamline components are locally designed, simulated, manufactured and tested with local resources. The MBOX should be able to measure the beam current and profile, as well as the beam emittance, to ensure an accurate match between IS and RFQ. It includes a number of diagnostic tools: a Faraday Cup, a scintillator screen, and a pepper pot plate (PP). An analysis software is developed and tested for the PP photo analysis. This contribution will present the proton beamline components and will focus on the MBOX measurements, especially on the PP emittance analysis.
 
poster icon Poster TUPORI17 [5.641 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2022-TUPORI17  
About • Received ※ 23 August 2022 — Revised ※ 09 September 2022 — Accepted ※ 26 September 2022 — Issue date ※ 29 September 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)